Stone surfaces should be professionally cleaned annually to remove dirt, germs, and other contaminants. This helps to extend the life of your floor and countertop surfaces and reduce maintenance costs.
A reputable restoration contractor should be used for deep restorative cleaning and honing services. It requires expertise and a good understanding of the unique properties of your natural stone.
Natural stone surfaces such as floors, walls, and countertops in a business or commercial building should look shiny, clean, and smooth. A professional restoration and maintenance program for these surfaces will keep them looking great.
Stone surfaces should generally be cleaned daily with a neutral cleaner or stone soap and a soft cloth. Avoid abrasive scouring powders or creams, as these can scratch specific rocks. Vinegar or lemon products should be avoided as these can dull and etch calcareous rocks.
If your stone was sealed during installation, it should be resealed annually. This will protect the surface from most stains. If a colour does occur, immediately blot the area with paper towels or a soft cloth and rinse with water. If the stain persists, a poultice may be necessary. With proper care, your natural stone will last a lifetime.
Natural stone is a highly durable material. However, as with any surface material, some things can damage it. These can be caused by neglect, improper cleaning techniques, and using chemicals not intended for the stone’s care.
Joint stone damage can include cracks, chips, pitting and scratching, water spots, mould & mildew stains, efflorescence, and discolouration. These damages can cause safety and sanitation issues in commercial properties and decrease property value.
A reputable commercial stone care Manhattan NY, can repair these issues and restore the look of your stone surfaces. Regular stone care, such as sweeping, mopping, and periodic rehoning, will help prevent damage. In addition, a protective sealant should be used to protect your stone against future wear and deterioration. The type of sealer needed for your stone will vary, so it is essential to consult with a professional.
Natural stone surfaces are porous, allowing air and water to infiltrate. This can lead to damage and etching if the surface is improperly sealed or protected.
Sealers can protect a stone from staining by creating an invisible barrier that repels water and oil-based substances. These products can be topical sealers (wax or acrylic) or impregnators that penetrate beneath the stone’s surface.
A stone that is constantly wet can develop mould & mildew stains and, in extreme cases, affect the integrity of the installation. Protect floor surfaces with nonslip mats and rugs to minimize this issue.
Using mats and rugs in areas with heavy foot traffic. Placing them in front of doorways can help reduce the amount of sand, dirt, and other debris tracked into the building. It is also a good idea to use trivets, mats, and coasters under dishes and glasses, particularly those that contain alcohol or citrus juices, as these can etch the stone’s surface.
A polished stone surface and structures require proper maintenance to avoid premature degradation. Waxes, acrylics, and other so-called sacrificial coatings increase the amount of care necessary for most stones and should be avoided unless under the guidance of a stone professional.
Proper maintenance should include sweeping, mopping, and scrubbing with non-treated scrub brushes. Periodic sanding and vacuuming will minimize the influx of abrasive dirt, grit, and sand that can scratch or damage natural stone surfaces. Mats or area rugs should be used inside and outside entrances to minimize shoes dragging on stone floors.
In a commercial setting, stone surfaces endure far more wear and tear than residential ones. If these stone surfaces are correctly maintained, regular polishing and resealing can significantly extend the life of the natural stone. Rely on the experts at Stone Care to implement a proactive maintenance plan for your commercial property..